How To Connect Bluetooth Devices To IPhone

The iPhone may not have a USB port for connecting accessories, but the iPhone is compatible with a ton of useful devices via Bluetooth. While most people think of Bluetooth as the way that wireless headsets get connected to phones, it's much more than that. Bluetooth is a general-purpose technology compatible with headsets, keyboards, speakers, and more. Connecting a Bluetooth device to an iPhone is called pairing. Regardless of what kind of device you're pairing to your iPhone, the process is basically the same. Begin by putting your iPhone and Bluetooth device near each other. Next, put the Bluetooth device you want to pair to the iPhone in discoverable mode. This allows the iPhone to see the device and connect to it. You make each device discoverable in different ways. For some it's as easy as turning them on, others require more work. Move the Bluetooth slider to On/green. If the device you want to pair with is listed, tap it.

You need to enter a passcode to connect some Bluetooth devices with the iPhone. If the device you're trying to pair is one of those, the passcode screen appears. Consult the device's manual for the passcode and enter it. Depending on what version of the iOS you're running, there are different indicators that you've paired your iPhone and the device. In older versions, a checkmark appears next to the paired device. In newer versions, Connected appears next to the device. With that, you've connected your Bluetooth device to your iPhone and can start using it. It's a good idea to disconnect a Bluetooth device from your iPhone when you're done using it so you don't run down the battery on both devices. Turn off the device. Turn off Bluetooth on your iPhone. In iOS 7 or higher, use Control Center as a shortcut to turn Bluetooth on and off. If you need to keep Bluetooth on but just disconnect from the device, go to the Bluetooth menu in Settings. Find the device you want to disconnect and tap the i icon next to it. On the next screen, tap Disconnect. In the pop-up menu, tap Forget Device.

Remember that Bluetooth is for short-range networking. If you move the device and iPhone too far apart, the connection will be lost and you'll have to follow these steps again. While Bluetooth doesn't drain as much battery as Wi-Fi, keeping it turned off when not in use is one of the ways that you can extend the battery life of your iPhone. The types of Bluetooth accessories that work with the iPhone and iPod touch depends on what Bluetooth profiles are supported by the iOS and device. Profiles are specifications that both devices must both support to communicate with each other. A2DP (Advanced Audio Distribution Profile) - Also known as Stereo Bluetooth, this lets iOS devices send wireless audio to compatible headphones and speakers. AVRCP (Audio/Video Remote Control Profile 1.4) - Allows the iOS to control compatible AV equipment (TVs, receivers, stereos, etc.). Hands-Free Profile (HFP 1.6) - Enables iOS devices to work with hands-free car kits and headsets. Human Interface Device Profile (HID) - Supports interface devices like mice, keyboards, and joysticks. Message Access Profile (MAP) - Mostly used for hands-free functionality in cars, this profile lets devices send messages to each other. Personal Area Network (PAN) - Allows connection between multiple devices via wireless networks. Phone Book Access Profile (PBAP) - Displays information from the device's address book, often used with hands-free car kits. Works on all iPhones.

In case of data exchange the bluetooth device does not allow interference, so it is easy to maintain the speed and the effectiveness. It is easy to connect bluetooth to iPhone by following the steps. Before starting, the users need to prepare for the required stuff. Step 1. Turn on bluetooth on the device, and bring iPhone in the searchable range. Step 2. Unlock iPhone. Step 3. Select Settings. Step 4. Tap Bluetooth. Step 5. Tap the button to turn on bluetooth. Step 6. iPhone will search the available devices. Step 7. Pair the devices. The process is shown as below, and this process can be applied to all the iOS devices. Users will need to prepare for the required stuff before starting. Check the steps below. Step 1. Please note that the iPhone models before 4s are not supported. Step 2. Check the iPhone to see whether the bluetooth is open. Step 3. Restart iPhone.

Step 4. Download and install the latest iOS. Step 5. Pair the devices to see if it succeed. At times the devices cannot be paired even if all the steps are fulfilled. If this happens, users should connect Apple Support to finish the task. Of course, the malfunctions of the devices can also lead to the disconnection. Fulfill the process below to finish the task, and before starting, users should prepare for the required stuff. The complete steps are mentioned as below. Step 1. Open bluetooth on iPhone and iPad. Step 2. The user now needs to find iPhone on iPad Bluetooth list. Step 3. Pair the two devices. Follow the steps below, and get prepared for the required stuff before starting the whole process. The steps are shown as below. Step 1. In the system tray the user needs to find the bluetooth icon. Step 2. Click the bluetooth icon and a dialog pops up. Step 3. Select Add Device so that the system searches the devices. Step 4. Once the device has been searched it will appear on the main panel. The users can pair the device with computer. Note: In the last step the Samsung Galaxy S3 has been mentioned as an example. Other devices can also get work done easily. The iPhone bluetooth is regarded as one of the best, and the users can connect the devices with no efforts. Using bluetooth can also help to transfer files in a fast way. Users can get a well knowledge of connecting bluetooth to iPhone through this tutorial.