How To Enter DFU Mode On IPhone 7 Or IPhone 7 Plus

The physical Home button on iPhone 7 and iPhone 7 Plus have been replaced with a capacitive home button with a new generation Taptic Engine. The taptic engine now provides feedback depending on the task you are doing and how you press down the button. Due to this, the method used to put your iPhone 7 or iPhone 7 Plus into DFU mode differs than its predecessor. In this tutorial, we are going to show how you can enter DFU mode on the new flagship iPhone models. Step 1: Make sure that you have the latest version of iTunes installed. Step 2: Plug in your iPhone 7 or iPhone 7 Plus to your computer via a lightning USB cable. Step 3: Next, turn off your iPhone. Step 4: Now press and hold down the Lock button on the right side of your iPhone for 3 seconds. Step 5: At the same time, press and hold the volume down button on the left side of your iPhone while still holding the Lock button. Keep holding both the buttons for 10 seconds.

Step 6: If you see the Apple logo on your screen, then you have to start all over again as you held the buttons for too long. Otherwise, continue with the steps below. Step 7: Then release the Lock button but keep holding down the volume down button for another 5 seconds. If you see the “Plug into iTunes” screen, then you have held it for too long and have to start all over again. Step 8: If the screen remains black, then it means you have entered DFU mode successfully! Tunes should now display a message that it has detected your iPhone 7 or iPhone 7 Plus and will allow it to be restored. Although this new method requires a little more effort than the one on older iPhone models, it’s just a matter of time before you get used to it. Let us know how the process goes in the comments below.

The nano-SIM tray on iPhone 5 is placed similarly, on the right side of the phone. Simply use the SIM eject tool or a paper clip to remove it and place your SIM card. Apple has launched the iPhone 6 that supports Nano SIM card, just like the iPhone 5 and iPhone 5S. The Nano SIM card slot on iPhone 6 and iPhone 6 Plus is located on the right side of the phone. Similar to iPhone 5 and iPhone 6, the new iPhone 7 & 7 Plus supports Nano SIM card. The SIM slot is located on right hand side just below the power button. To open the SIM tray, simply insert a paper clip or a SIM-ejector tool into the hole and pop it out. Now place the nano SIM with its gold side facing downwards and insert back the tray in the same orientation as you removed it.

The Apple users who pre-ordered iPhone 7 / 7 Plus in the first place mostly have received their new iPhone and can not wait to try the new features. The battery life has been improved to a certain level — iPhone 7 has 2-hour longer battery life than iPhone 6S and 1-hour longer with respect to the Plus battery upgrade. What about the charger, The power output by the charger directly affects the charging speed. Phones, in their current state, ship with a charger that supports a 1A /5W charger. It may a little bit disappoint the iPhone 7 users that the charger comes in the box keeps exactly the same as the last generation, no input power upgrade means longer charging time due to a higher battery capacity. However, it’s not a secret that an iPhone can be charged faster with a 2.4A /12W iPad adapter. With such an out-of-date charger it’s hard to say whether iPhone 7 / 7 Plus can win the market against some Android smartphones featured with quick charge technology.



Here comes good news from the iPhone 7 pioneers. W ) when he applied a MFi 3rd party manufactured charger instead of a genuine iPhone 7 charger. How to quick charge iPhone 7/ 7 Plus, As a commonly acknowledged fact, the charging speed of iPhone and iPhone Plus is not exactly the same. Phone 6S Plus can support around 8W charging power which is limited by battery capacity and capability of heat dissipation, while iPhone 7 is able to reach an impressive charging power of 10W reportedly. Therefore, it would be much faster to charge your iPhone 7/ 7 Plus with an iPad charger 10W / 12W or a 3rd party branded charger featured higher input power. Each port can output 2.4A /12W at maximum and adjust the output power dynamically to quick charge your iPhone 7/ 7 Plus at full speed. Will the next iPhone feature Quick Charge technology, Before the official release event of iPhone 7 / 7 Plus, rumors said iPhone 7 would definitely feature quick charge. I’d rather believe that Apple will focus on developing wireless quick charge technology, citing an unnamed company official, it is said that Apple had started a wireless charging developing program with Energous Corp for 2 years. Just as Apple design director Jonathon said, the future is wireless. Wireless charging might be a new feature for iPhone 8, while audio and charging adapter is something you can definitely add into your iPhone 7/7 Plus accessories now. Due to the missing headphone jack, this little thing can help you out when you would like to listen to music while charging.